How it works

Watch the video below for a brief demonstration of how AeroBarrier can help you achieve air sealing requirements.

AeroBarrier Sealing Process:

1) Setup

Equipment is set up at the job site. Conveniently transported by trailer, AeroBarrier install equipment is mobile and portable. The equipment includes a compressor, generator, blower door, emitters, hoses, and the AeroBarrier machine.

2) Prep

Prep the space. This includes taping or covering any areas that won’t be sealed. Horizontal surfaces should be taped or covered. Emitters are then set up throughout the area to be sealed.

3) Pressurize

We pressurize the space using a blower door. A computer does the rest, including the control of temperature, pressure, humidity, and distribution of sealant during the process.

4) Seal

See the results in real-time. Throughout the application process, the computer monitor displays the ACH improvement, allowing you full control over your desired level of envelope tightness and the leakage reduction.

5) Certify

Run a final blower door test to verify the sealing results. At the end of the process, receive an AeroBarrier Certificate, with a pre and post leakage report.